User Area
11/04/2024 all 10:00:04 |
Pregi: scrivo ora dopo aver testato l'addolcitore, confermo ottimo prodotto come da descrizione,grazie per ... |
Difetti: |
Voto: 5 |
11/04/2024 all 08:08:59 |
Pregi: ... |
Difetti: |
Voto: 4 |
06/03/2024 all 07:04:13 |
Pregi: Bonjour dommage que la notice ne soit pas en français Cordialement ... |
Difetti: |
Voto: 5 |
click to zoom the image
|
Constant pressure system
Constant pressure inverter system for pumps with single-phase motors.
Nomenclature: Mito
Company: Italtecnica
Function: constant pressure management Max power: 0,75 kW (1,00 HP) Installation: vertical Dry running protection: yes Expansion vessel/tank: recommended (min.20% max flow of the pump)
Why should you add the expansion vassel to the frequency inverter drive system?
The basic plant does not require the use of a compensation tank/vassel. But if you want to maximize the energy consumption and the duration of the electric pump, it's necessary to add a tank. In fact, by using a water tank, the continuous and repeated starts of the electric pump (due to small withdrawals and/or water leaks in the water system) are avoided; Decreasing the start/stop of the electric pump:
1) Decreases energy consumption;
2) Extends the life of the electric pump.
|
|||
|
Description |
Max power load kW (HP) |
|
VAT EXCLUSIVE
|
|
---|---|---|---|---|---|
MITO MONOFASE |
Dispositivo Varvolts V230M | 0,75 kW (1,00hp) |
Sconto 40 % |
|
AC/AC CHOPPER DRIVER FOR SINGLE PHASE ELECTRIC PUMPS
The pump is initially started at maximum speed and is then progressively adjusted depending on the flow required. In this way, output pressure is supplied at a constant rate for greater comfort.
Pressure is regulated for a maximum time interval (settable in the parameter "Cool mode" from 5 to 30 minutes according to the type of pump), during which supply demand should expire. When this period elapses, if the demand for water supply persists, the pump motor is set to maximum speed to avoid overheating, caused by reduced ventilation. On closure of all supply points, pump shutdown and consequent cooling of the motor enables reset of the regulation time for the next pump start-up cycle, in relation to the pause time and operation time (one minute shutdown corresponds to one minute of regulation in the next cycle).
Main characteristics:
- Protection against dry operation of the pump in case of lack of water.
- Automatic reset following shutdown due to dry operation.
- Alarm relay and signalling of anomalies.
- Digital input for float or connection to external control.
- Removable electric terminals to facilitate wiring.
- Digital indication of pressure on the display.
- Signalling of the various operation/error conditions via light indicators and messages on the display.
Applications: Electronic flow and pressure devices, Variable speed drivers for constant pressure control, Dry running protection.
Complete your system with the help of Pippohydro
Pressure Tanks:
Elbi expansion tanks D series
Elbi expansion tanks DV series
Expansion vessels up to 36 liters
Base expansion tanks from 36 to 150 liters liters
Global C2 LITE floor standing expansion tanks