User Area
11/04/2024 all 10:00:04 |
Pregi: scrivo ora dopo aver testato l'addolcitore, confermo ottimo prodotto come da descrizione,grazie per ... |
Difetti: |
Voto: 5 |
11/04/2024 all 08:08:59 |
Pregi: ... |
Difetti: |
Voto: 4 |
06/03/2024 all 07:04:13 |
Pregi: Bonjour dommage que la notice ne soit pas en français Cordialement ... |
Difetti: |
Voto: 5 |
Product: Kit with base and manifolds for water pressure increase units with two vertical multistage electric pumps - Components for the automation of electric pumps
|
System power supply |
Base |
Pumps distance | Manifold delivery diameter | Manifold suction diameter |
EXCLUSIVE VAT
|
|
|
---|---|---|---|---|---|---|---|---|
KIT.VE 540 125/125 230M 2POMPE 1.25HP PREDISPOSIZIONE INVERTER ASPIRAZIONE 1"1/4 MANDATA 1"1/4 |
monofase 230Vac | Lungh.540mm Largh.310mm Altezza 54mm | 300mm | 2" | 2" |
Sconto 50 % |
|
|
KIT.VE 540 125/125 230M 2POMPE 1.5HP PREDISPOSIZIONE INVERTER ASPIRAZIONE 1"1/4 MANDATA 1"1/4 |
monofase 230Vac | Lungh.540mm Largh.310mm Altezza 54mm | 300mm | 2" | 2" |
Sconto 50 % |
|
|
KIT.VE 540 125/125 230M 2POMPE 1HP PREDISPOSIZIONE INVERTER ASPIRAZIONE 1"1/4 MANDATA 1"1/4 |
monofase 230Vac | Lungh.540mm Largh.310mm Altezza 54mm | 300mm | 2" | 2" |
Sconto 50 % |
|
|
KIT.VE 720 100/100 400T 2POMPE 1.5HP PREDISPOSIZIONE INVERTER ASPIRAZIONE 1" MANDATA 1" |
trifase 400Vac | Lungh.720mm Largh.310mm Altezza 54mm | 300 mm | 1"1/2 | 2" |
Sconto 50 % |
|
|
KIT.VE 720 125/125 400T 2POMPE 2HP PREDISPOSIZIONE INVERTER ASPIRAZIONE 1"1/4 MANDATA 1"1/4 |
trifase 400Vac | Lungh.720mm Largh.310mm Altezza 54mm | 360 mm | 2" | 2" |
Sconto 50 % |
|
|
KIT.VE 720 150/125 400T 2POMPE 5.5HP PREDISPOSIZIONE INVERTER ASPIRAZIONE 1"1/2 MANDATA 1"1/4 |
trifase 400Vac | Lungh.720mm Largh.310mm Altezza 54mm | 360mm | 2" | 2" |
Sconto 50 % |
|
Kit base/mainfold for two electric pumps with frequency inverter device
Complete kit for the assembly of 2 electric pumps in an horizontal booster unit; This kit allows, thanks to the different sizes and powers of the table, to combine any type of single-phase 230Vac or three-phase 400Vac electric pump. The materials and the innovative design allow the assembly in a very short time. For an intuitive assembly, it is supplied with fittings and valves already installed (without sealant).
The kit contains:
- 01 intake manifold in galvanized steel for 2 vertical electric pumps with opposing ports
- 01 delivery manifold in galvanized steel for 2 vertical electric pumps with opposite ports
- 01 galvanized steel base for 2 electric pumps
- 01 square rod
- 02 magnetothermal switch in IP65 switchboard
- 01 pressure transducer
- 01 analog pressure gauge
- 01 Non-return valve kit for suction
- 01 Ball valve kit for suction and delivery
- 01 Assembly fittings kit
- 01 1/2 "valve and suction cap (system load)
- 01 Electric cables kit for pumps
- 01 Kit of bolts, nuts, washers, anti-vibration feet
- 01 Silicon-tape tape kit or anaerobic sealant
-
01 11mm iron tip (to make holes in case of need)
Possible couplings:
Elbi expansion tanks D series
Elbi expansion tanks DV series
Expansion vessels up to 36 liters
Base expansion tanks from 36 to 150 liters liters
Global C2 LITE floor standing expansion tanks
Create your pressurization set with Pippohydro
This kit can be mounted on any electric pump
Rinaldi & Pettinaroli fittings, fiv valves, Unival valves pn40
You might also be interested in:
Brass check valve
Spring check valve
MF spring check valve in stainless steel
FF spring check valve in stainless steel
Check valve in nylon & stainless steel
Ball check valve
PVC Single ferrule valve - uninon check valve
Brass tubular foot-valve
Brass foot valve with strainer
Check valve to amortise water hammer
Kit valves for wells
Float breather valve
Complete your system with the help of Pippohydro
Choose the frequency inverter: an efficient way for energy saving