Product: Italtecnica Mito variable frequency drive VFD - Variable-frequency drive (VFD) for pumps

click to zoom the image

Italtecnica Mito variable frequency drive VFD 1

Italtecnica Mito variable frequency drive VFD 2

Italtecnica Mito variable frequency drive VFD 3

Italtecnica Mito variable frequency drive VFD 4

Richiesta informazioni veloce

Email per la risposta*

Richiesta*

Devi allegare file o foto? Usa il modulo completo

Constant pressure system
Mito Italtecnica pumps variable frequency drive

Constant pressure inverter system for pumps with single-phase motors.
Mito is an electronic device that controls the starting and stopping of an electric pump, regulating its operation in response to the instantaneous supply conditions. It is designed for domestic applications, where supply demands are medium-short term and generally timed over the space of one day.

Nomenclature: Mito

Company: Italtecnica
Function: constant pressure management
Max power: 0,75 kW (1,00 HP)
Installation: vertical
Dry running protection: yes
Expansion vessel/tank: recommended (min.20% max flow of the pump)

risparmio energetico

Why should you add the expansion vassel to the frequency inverter drive system?

The basic plant does not require the use of a compensation tank/vassel. But if you want to maximize the energy consumption and the duration of the electric pump, it's necessary to add a tank. In fact, by using a water tank, the continuous and repeated starts of the electric pump (due to small withdrawals and/or water leaks in the water system) are avoided; Decreasing the start/stop of the electric pump:

1) Decreases energy consumption;

2) Extends the life of the electric pump.

All related products and accessoires:

The following products models are available for purchase:

	Description	Max power load kW (HP)	Shipping (days)	VAT EXCLUSIVE	Qty
MITO MONOFASE - NON DISPONIBILE	Dispositivo Varvolts V230M	0,75 kW (1,00hp)	3 gg	Sconto 40 % € 224,40 € 134,64

Description

Max power load
kW (HP)

Shipping
(days)

VAT EXCLUSIVE

Qty

MITO MONOFASE - NON DISPONIBILE

Dispositivo Varvolts V230M

0,75 kW (1,00hp)

3 gg

Sconto 40 %

€ 224,40

€ 134,64

AC/AC CHOPPER DRIVER FOR SINGLE PHASE ELECTRIC PUMPS

The pump is initially started at maximum speed and is then progressively adjusted depending on the flow required. In this way, output pressure is supplied at a constant rate for greater comfort.

Pressure is regulated for a maximum time interval (settable in the parameter "Cool mode" from 5 to 30 minutes according to the type of pump), during which supply demand should expire. When this period elapses, if the demand for water supply persists, the pump motor is set to maximum speed to avoid overheating, caused by reduced ventilation. On closure of all supply points, pump shutdown and consequent cooling of the motor enables reset of the regulation time for the next pump start-up cycle, in relation to the pause time and operation time (one minute shutdown corresponds to one minute of regulation in the next cycle).

Main characteristics:

- Protection against dry operation of the pump in case of lack of water.
- Automatic reset following shutdown due to dry operation.
- Alarm relay and signalling of anomalies.
- Digital input for float or connection to external control.
- Removable electric terminals to facilitate wiring.
- Digital indication of pressure on the display.
- Signalling of the various operation/error conditions via light indicators and messages on the display.

Applications: Electronic flow and pressure devices, Variable speed drivers for constant pressure control, Dry running protection.