Product: Pippo automatic air feeders - water booster - Pressure vessels, autoclaves & accessories
CLICK HERE TO DISPLAY THE MAIN CATEGORY OF THIS PRODUCT
Pressurization - Water booster system
The automatic air feeders of the Blue series allow the creation and stabilization of the air cushion of the pressurization systems with surface centrifugal pump.
All the devices are equipped with a Venturi system. The feeder must be installed in a vertical position.
Product operation consists of an air intake of about 30 seconds each time the pump is started.
The following products models are available for purchase:
|
Type |
Code |
Autoclave |
Diameter |
Hight (H) |
To the autoclave (d1) |
Suction (d2) |
|
EXCLUSIVE of VAT |
|
|---|---|---|---|---|---|---|---|---|---|
|
BLUE.0500 |
EM.100.500 |
100:500 | 106 mm | 220 mm | 1/2'' | 1/2'' |
|
|
|
|
BLUE.2000 |
EM.750.2000 |
750:2000 | 162 mm | 277 mm | 1/2'' | 3/4'' |
|
|
|
|
BLUE.4000 |
EM.3000.4000 |
3000:4000 | 160 mm | 410 mm | 1/2'' | 3/4'' |
|
|
|
|
BLUE.VALV |
--- |
Valvolina di ricambio | --- | --- | --- | --- |
|
|
.png)
Automatic air renewal for assembly on surface pump with tank.
Suitable for water booster systems with external centrifugal pumps.
Each time the pump starts, a flow of water passes from the autoclave to the pump, through the feeder and then the Venturi.
In this way, through the intake valve, a flow of air is created from the outside. This progressively replaces the water contained in the feeder.
So the automatic air feeder is ready to perform the next cycle.
Complete your system with the help of Pippohydro
,
