User Area
11/04/2024 all 10:00:04 |
Pregi: scrivo ora dopo aver testato l'addolcitore, confermo ottimo prodotto come da descrizione,grazie per ... |
Difetti: |
Voto: 5 |
11/04/2024 all 08:08:59 |
Pregi: ... |
Difetti: |
Voto: 4 |
06/03/2024 all 07:04:13 |
Pregi: Bonjour dommage que la notice ne soit pas en français Cordialement ... |
Difetti: |
Voto: 5 |
Product: Pippohydro - KIT SWITCHMATIC 2 pumps - Kit with base, and suction & delivery manifolds for two-pumps water boosting set - Components for the automation of electric pumps
click to zoom the image
|
Pump Components & Accessories |
|
System power supply |
Base
dimensions
|
Pumps distance | Manifold delivery diameter |
Manifold suction diameter |
|
EXCLUSIVE
VAT
|
|
---|---|---|---|---|---|---|---|---|
KIT SW.MATIC2 ASPIRAZIONE 1" MANDATA 1" |
2,2kW-3,00Hp | Lungh.520mm Largh.310mm Altezza 54mm | 300mm | 1"1/2 | 2" |
Sconto 50 % |
|
|
KIT SW.MATIC2 ASPIRAZIONE 1"1/4 MANDATA 1"1/4 |
2,2kW-3,00Hp | Lungh.520mm Largh.310mm Altezza 54mm | 300 mm | 2" | 2" |
Sconto 50 % |
|
|
KIT SW.MATIC2 ASPIRAZIONE 1"1/4 MANDATA 1" |
2,2kW-3,00Hp | Lungh.520mm Largh.310mm Altezza 54mm | 300 mm | 1"1/2 | 2" |
Sconto 50 % |
|
|
KIT ASP. 1" MAND.1" SENZA PRESSOSTATI |
---- | Lungh.520mm Largh.310mm Altezza 54mm | 300 mm | 1"1/2 | 2" |
Sconto 50 % |
|
|
KIT ASP. 1"1/4 MAND.1" SENZA PRESSOSTATI |
---- | Lungh.520mm Largh.310mm Altezza 54mm | 300 mm | 1"1/2 | 2" |
Sconto 50 % |
|
|
KIT ASP. 2" MAND.1"1/4 SENZA PRESSOSTATI |
---- | Lungh.520mm Largh.310mm Altezza 54mm | 300 mm | 2" | 3" |
Sconto 50 % |
|
SWICHMATIC KIT WITH TWO PUMPS FOR PRESSURE BOOSTING UNITS
Kit for 2 electric pumps booster unit; This kit allows to combine any type of single-phase 230Vac electric pump. The materials and the innovative design allow the assembly in a very short time. For an intuitive assembly, it is supplied with fittings and valves already installed (without sealant).
- 01 galvanized steel suction manifold for 2 electric pumps
- 01 galvanized steel delivery manifold for 2 electric pumps
- 01 galvanized steel base for 2 electric pumps
- 02 switchmatic electronic pressure switch
- 04 3-piece brass fitting
- 01 additional analogue pressure gauge (the pressure can be see in the electronic pressure switches)
- 01 Intake valve kit for non-return valves
- 01 Ball valves kit for suction and delivery
- 01 Assembly fittings kit
- 01 1/2 "valve and suction cap (system load)
- 01 Electric cable kit for pumps and for pressure switch
- 01 Kit of bolts, nuts, washers, anti-vibration base
- 01 Silicon-tape kit or anaerobic sealant
-
01 11mm iron tip (to make holes in case of need)
Operation:
The electric pumps operate individually, alternating (start / stop). When the required water flow exceeds that which can supply only one electric pump, the switchmatic system makes the second pump intervene to support the first one.
Protections:
Overcurrents
Pump block
Quick cycles
Dry running
Possible couplings:
The kit is combined with the following pressure tanks (48 liters minimun is recommend):
Elbi expansion tanks D series
Elbi expansion tanks DV series
Expansion vessels up to 36 liters
Base expansion tanks from 36 to 150 liters liters
Global C2 LITE floor standing expansion tanks
Electric pumps complementary to the product
1x230 single-phase surface electric pumps (home, community, technology)
Single-phase submersible pumps 1x230 (home, community, technology)
Create your pressurization set with Pippohydro
This kit can be mounted on any electric pump
Rinaldi & Pettinaroli fittings, fiv valves, Unival valves pn40
You might also be interested in:
Brass check valve
Spring check valve
MF spring check valve in stainless steel
FF spring check valve in stainless steel
Check valve in nylon & stainless steel
Ball check valve
PVC Single ferrule valve - uninon check valve
Brass tubular foot-valve
Brass foot valve with strainer
Check valve to amortise water hammer
Kit valves for wells
Float breather valve
Complete your system with the help of Pippohydro
Choose the frequency inverter: an efficient way for energy saving