Our products
User Area
| 11/04/2024 all 10:00:04 |
| Pregi: scrivo ora dopo aver testato l'addolcitore, confermo ottimo prodotto come da descrizione,grazie per ... |
| Difetti: |
| Voto: 5 |
| 11/04/2024 all 08:08:59 |
| Pregi: ... |
| Difetti: |
| Voto: 4 |
| 06/03/2024 all 07:04:13 |
| Pregi: Bonjour dommage que la notice ne soit pas en français Cordialement ... |
| Difetti: |
| Voto: 5 |
Search here :
You are here: Pressure switches, VFDs, Spare parts for pumps > Accessories for pumps and booster units > Pressure vessels, autoclaves & accessories
Product: Elbi SC-E - SC-E2 galvanized expansion tanks without membrane - version without testing - Pressure vessels, autoclaves & accessories
click to zoom the image
|
SC-E SC-E2 Elbi galvanized expansion vessels
The SC/E cold water tanks can be used as not pressurised water tanks or as pressurised storage tanks for cold water (accumulation without the air cushion).
Complies with Art. 3.3 of the European Directive 97/23/EC (PED) with CE marking.
NOMENCLATURE: SC / E (tall/long type) - SC / E2 (short type)
WORKING PRESSURE: 10 Bar
CAPACITY: from 100 liters to 500 liters
MODEL TYPE: Long - short
   
|
|||
The following products models are available for purchase:
|
|
Nominal |
IN OUT |
Max diameter |
Hight |
|
Exclusive of VAT
|
|
|---|---|---|---|---|---|---|---|
|
SC/E2 100 TIPO BASSO |
100 lt | 1'' | 500 mm | 780 mm |
Sconto 25+15 % |
|
|
|
SC/E 100 TIPO ALTO |
100 lt | 1" | 400 mm | 965 mm |
Sconto 25+15 % |
|
|
|
SC/E2 200 TIPO BASSO |
200 lt | 1''1/4 | 600 mm | 1020 mm |
Sconto 25+15 % |
|
|
|
SC/E 200 TIPO ALTO |
200 lt | 2" | 500 cm | 1255 cm |
Sconto 25+15 % |
|
|
|
SC/E2 300 TIPO BASSO |
300 lt | 1''1/4 | 650 mm | 1205 mm |
Sconto 25+15 % |
|
|
|
SC/E 300 TIPO ALTO |
300 lt | 2" | 550 mm | 1505 mm |
Sconto 25+15 % |
|
|
|
SC/E2 500 TIPO BASSO |
500 lt | 1''1/2 | 775 mm | 1405 mm |
Sconto 25+15 % |
|
|
|
SC/E 500 TIPO ALTO |
500 lt | 2" | 650 mm | 1800 mm |
Sconto 25+15 % |
|
.png)
SC/E galvanized expansion tanks (without testing)
Main features
• Min./max. working temperature: -10° - +50°C
• Maximum working pressure:
10 bar (2 sleeve model);
10 bar (traditional model) from 100 to 500 litri
6 bar (traditional model) from 750 to 5.000 litri
you are here)
Do I really need a pressure tank?
A pressure tank is important because it keeps water pressure at a constant level. It also keeps the water and air separated. Without these features the water pump would turn on and off quickly and the motor can quickly burn out.
An air charge in the tank delivers water pressure out of the tank and into the hose to avoid water pump rapid on-off cycling or "short cycling" that damages the system.
With the use of a pressure tank, the pump starting times are reduced and the water hammers are absorbed by the tank.
Complete your system with the help of Pippohydro
