Product: Expansion tank mounting bracket - Extensible support for pressure tank - X-Power Pressure tanks - Expansion vassels
Pressure tank accessories
Wall mount bracket for pressure tank
Main Features
This Wall-bracket is designed to hold expansion tanks with a maximum radius of 23 cm and weight not exceeding 55 kg. Simple to install, it is equipped with wall anchors and a 1 "x 3/4" adapter.
Painting: epoxy powders - RAL 9006 silver
Telescopic extraction arm: from 150 mm to 230 mm
Thread: 1"
Material: carbon steel
Excellent seal is ensured thanks to the pressure lock with sliding groove.
The following products models are available for purchase:
|
|
Telescopic arm range(mm) |
Connection |
Max weight (Kg) |
Plate dimensions (mm) |
|
EXCLUSIVE VAT
|
|
|---|---|---|---|---|---|---|---|
|
MOD.1 SUPPORTO ASOLATO PER VASO AD ESPANSIONE - NON DISPONIBILE |
150 - 230 | 1"- 3/4" | 55 | 900x900 |
|
|
|
|
MOD.2 SUPPORTO SEMPLICE PER VASO AD ESPANSIONE XP6060 |
160-220 | 1" | 30 | 900x950 |
|
|
.png)
Fix the metal plate to the wall at the desired height
using the appropriate dowels (hole Ø 10 mm)
that are contained in the package.
Screw the pressure tank to the 1"support
or
connect it using a 1"x3/4"adapter (supplied).
Insert the arm into the base by sliding it to the desired length.
Finally tighten the screw with a 13mm wrench.
A pressure tank is important because it keeps water pressure at a constant level. It also keeps the water and air separated. Without these features the water pump would turn on and off quickly and the motor can quickly burn out.
With the use of a pressure tank, the pump starting times are reduced and the water hammers are absorbed by the tank.
Complete range of membrane expansion vessels :
Complete your system with the help of Pippohydro
